Sliding Patio Doors Repair
It is possible for sliding patio doors to be difficult to open and close. This could be due to a variety of issues, including dirty tracks or rollers that are not aligned properly.
Start by cleaning and lubricating your rollers. You can also make use of the adjustment holes at the bottom of the movable panel to re-align your rollers.
Track that is damaged or dirty
A dirty or damaged track can cause a sliding door to not slide properly. Over time, dirt and grit, as well as rust can accumulate blocking the track from moving smoothly. The solution is to clean the track thoroughly with the use of a brush and mild detergent. This job should be done regularly to ensure smooth operation and make sure that costly repairs are not required in the future.
A leaking door is another common issue that requires prompt attention to avoid the growth of mold, water damage and structural degradation. The issue is usually caused by worn weather stripping and a misaligned door. This can be fixed by replacing the old weather stripping and aligning the doors.
Another common problem that can be solved with a bit of DIY work is the problem of rollers that veer off their tracks. This can be a difficult task so you should ask a trusted friend to assist you. Sit inside the house and lean a panel toward you to reposition the rollers. When the panel is lifted off the bottom track, it's time to place it on sawhorses in order to stop it from falling off. Then, loosen each of the roller's screws and then pry them out using the screwdriver. You can now remove any dirt that is caught between the wheels and the tracks. Clean each wheel using denatured alcohol and a rag, then reposition the wheels and reconnect them to their tracks.
It may be possible to straighten a bent section of track with a mallet made of rubber and a block of wood. However in the event that the bent portion is close to the hinges and is likely to cause more damage, you'll be better off calling in a professional for safety reasons.
Misaligned Rollers
If your sliding door is having difficulty sliding, it's likely that the rollers have been misaligned. The wheels may be dirty or rusted and their bearings are worn down. This causes friction between the bottom of the door and the track, causing it to grind or snag when it's opened or closed. It also makes squeaking noises.
This is a straightforward solution. You don't have to remove the door to get at the wheels since they are located on a bracket which is adjustable. Use a screwdriver to find the holes for adjustment on the frame (usually on either side). Rotate the screws to turn the wheels. A clockwise rotation of the screw raises the wheel, while a counterclockwise rotation lowers it. Continue adjusting the door until it is open and shuts easily.
It is essential to adjust the wheels prior making adjustments to the latch. To ensure that the lock functions correctly the latch hooks have to be aligned with the strike plate. If you don't do this, the latch could shut or open while you're away from the room.
A sliding patio door is an investment. Maintaining them in good working order will ensure the safety of your family. You can avoid future expensive repairs by fixing problems that are common, like broken tracks, rollers, and handles. If you need help with your patio doors, call our team. We will assess your sliding patio door repair needs and help you keep it in good shape. Our experts can also assist with any replacement parts that you may need.
The door frame is sagging or damaged
Doors for sliding patios are a wonderful addition to any home. They offer a convenient and attractive alternative to hinged or swing-open doors for patios. Like any other hardware item sliding patio doors are prone to become problematic in time. Fortunately, a lot of these issues are simple to fix with a bit of DIY knowledge.
A gap in the frame is a common problem with sliding patio doors. It could be due to a variety of factors, such as a an improperly aligned track or rollers, a damaged track or door, or a bowing frame for the door. Most of the time the reason for this problem can be easily fixed by removal of the door and reconnecting the track or rolling elements. This must be done with care to not cause damage to the track or frame.
In some cases it might be necessary to replace the entire track. This is easily done with a universal replacement kit which is readily available at major hardware stores. These kits are simple to install and will have your door working perfectly in no time.
sliding patio door repairs near me RepairMyWindowsAndDoors is essential to regularly inspect your sliding door's frame and hardware for signs of wear and tear, like loose screws or bolts. These can often be tightened using a screwdriver or wrench which makes this a simple and efficient DIY patio door maintenance step. It is also essential to lubricate the rollers and tracks of your patio door to ensure smooth operation and to prevent premature wear.
Patio doors are typically the primary entrance to the backyard and outdoor living space for a lot of homeowners. Therefore, they have to be able to function correctly to ensure the safety of their homes and provide security. By taking the time to implement these easy maintenance tips homeowners can extend the life of their sliding patio doors, and avoid costly repairs or replacements.
A faulty handle
Patio doors that slide open are the perfect way to access your backyard and to enter your home, but they aren't always easy to operate if damaged or misaligned. A damaged handle could cause the door to not open or close properly. The good news is that fixing a loose handle is a relatively simple task that can be completed at home.
In many cases the reason for a loose grip is a result of screws that have fallen out of the backplate. To fix the issue tighten the screws on the inside handle using the help of a screwdriver. If the handle remains loose, it could indicate that the threads have worn away and require replacement.
Or, a damaged latch could be the cause. This is more likely occur if the latch is made of plastic, not metal. If the latch isn't catching or turning you can try oiling it first to see if it can help. If not, you could require replacing the lock completely.
In the end, the handle could become difficult to use when it is damaged or cracked. If this is the case it is necessary to replace it with a new handle that matches the style of your sliding patio door.
Feldco can help restore your patio doors back to their former splendor, no matter if they are brand new or old and old-fashioned. We offer high-quality doors in different sizes and styles that can be fitted to fit your home perfectly. Contact us today for more about our doors! We offer services to Southern California homeowners, including Ventura County and Orange County.
Faulty Weatherstripping
If you're seeing light in windows and doors that are closed or feel a draft pushing against the window or door It's time to replace your weather stripping. These strips create a secure seal that prevents air, pests, and water from getting inside your home. It also keeps your conditioned and heated air inside, saving you money on energy bills year-round.
It may have lost its positive seal, bouncy, due to age. It is easy to identify this by running a dollar bill under the seal at the top and bottom of the jamb as well as the door frame where they meet. If the dollar bill slides easily between the seal and the door then it's time to replace the weather stripping.
If you only replace the worn-out part of the weather stripping, this may cause future problems with the seal. It is more efficient to replace all of the stripping. This will allow you to be sure that your door will be sealed properly.
For a simple DIY project follow our guide on weather stripping to remove the old weather stripping and then apply the appropriate material to your sliding patio door and frame to create a durable, tight seal. This is a great way to save money on your energy bills and fix your sliding patio door. Don't wait until its too late. Your wallet and home will be thankful.